What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
11.06.2025 12:07

This device then solves the entire problem.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
In schematic diagrams this is the symbol for a fuse:
The third is lightning and “how it gets conducted into a home.”
Belmont Stakes 2025: Win, place, show, exacta, trifecta and superfecta picks - SportsLine
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Destiny 2 Reveals Major Armor Stats Overhaul Coming In The Edge of Fate - The Game Post
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
2024–10–14 [Omar Gharbi Omar Gharbi ]
What is lightning?
Can the fuse protect the electronic devices from lightning instead of a surge protector.
CNN’s Live ‘Good Night, and Good Luck’ Telecast Spurs Special Coverage - Variety
but I think this circuit , shows a few more pieces.
nine
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
David Beckham scores a winner with the royal circle - BBC
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Because the load is inductive, the current lags the voltage.(by a bit).
Packers waive receiver, open up roster spot - Acme Packing Company
[image of Common-mode choke]
Barnstars:
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
New study raises big questions about taurine as anti-aging supplement - Live Science
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
He then describes the function of a fuse.
eight
Do countries with free health care generally have co-pays or deductibles to discourage use?
At least they know the answer if they wanted it.
Edit 2024–10.
Here is a simplified AC power diagram.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
The bolt then partially travels down the line to your home.
I post the exact comment here.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
At one ohm, the resistor has a maximum of 1 watt power.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
What does a fuse do?
a photo is worth a thousand words.
It seems Mohan does not understand the difference between a comment and an Answer.
But it can get overloaded, and no longer works.
First Sentence:
He then asserts :
A 'Crazy Idea' About Pluto Was Just Confirmed in a Scientific First - ScienceAlert
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
There are three different concepts here that are getting confused.
The other is “what does a “fuse” do?”
This is 'the assistant's answer'
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
This is where the MOV conducts again, and dissipated the energy.
so, what happens?
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
what exactly is a ‘surge’ protector?
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
One
2024–10–16 [ OO OLAOYE OYEBODE ]
A circuit breaker is similar, but is resettable.
A fuse is a non-resetable over current circuit protector.
There are two important concepts here.
(Dc diagram shown, AC is similar).
For this case there are devices called Metal oxide varistors (MOV).
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
An AC voltage/ current source, and an ac inductive load.
the problem then depends on "how fast does the fuse operate?".
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Upvotes:
So, the voltage could go up to 500 volts, and the fuse will not open up.
One is “what exactly is in a ‘surge protector’ ? ”
This one hit behind the barn.
But… the neutral is now “floating” because of the 1 ohm resistance.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
He then describes Rainy Season and Lightning.
This is where this question deviates from being a 'generic' question, and becomes more specific.
2024–10–10[John johnson John Johnson ]
The MOV will conduct when the voltage exceeds 50% of line voltage.
These are simplified answers to the original question, and does not change anything I wrote above.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
Now when you have a certain ac resistance, then a current flows in a loop.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
These devices are installed between the “hot” and “neutral” and protective ground.
[old diagram got deleted by accident]
It also is a device that limits the change in current flow.
but this device (an Inductor) … impedes the rapid changes in the current.